All cars have their own unique type of car speaker installation issues although installing speakers is a relatively simple process. Most speaker installations can be finished in about an hour or less. The intricacy of the installation will vary depending on the vehicle. And again, depending on the vehicle, speakers may be installed in the dash, doors, or rear deck.
Most importantly, remember that safety should be considered when installing speakers. Damage can be caused by not installing speakers properly – this can impose added cost and even possible injury. Protection for hearing/vision should be used as necessary.
Here are fundamental steps to consider for installing speakers http://itsnews.co.uk/. Remember, some vehicles may require extra steps. Although the location of the speakers in your vehicle may vary from the mounting locations noted here, the method should be comparable.
For installation of dash and door speakers, you will need to ascertain if the vehicle has speaker grilles that are removable. If they can be removed, take the grilles off utilizing the appropriate tools, remove the screws holding the speaker in, disconnect the speaker harness that was attached to the speaker, connect the speaker harness to the new speaker, plug the speaker harness which is connected to the new speaker to the harness in the car, set the speaker in the opening and reinstall it using the screws for mounting, replace the grille and repeat with the other speaker. If installing speakers in the door, make certain the depth of the speaker will not interfere with the window operation after installation.
If the grilles cannot be removed, the dash pads or possibly the door panel will have to be removed. Be sure to keep an eye on any screws/clips removed should this be the case. Next follow the same steps shown above except you will need to reinstall the dash pads/door panel. If removing the door panel, be aware that screws can be mounted in the armrest or inside the door latch space and may be behind the trim panels. After all the screws are removed from the panel, raise it up so you can disconnect any wiring harnesses.
If installing rear deck speakers, you must determine if the speakers are top-mounted or bottom-mounted as this will determine your steps. If top-mounted, remove the grilles, remove the screws holding the speaker in, disconnect the speaker harness, connect the harness to the new speaker, plug in the harness connected to the speaker to the vehicle side of the harness, place the new speaker in the opening and mount with the screws, replace the grille and repeat with the other speaker.
In-wall surround sound speaker is one of the different types of in-wall speakers. In-wall speaker are an ideal solution for those who want to enjoy music by keeping their speakers hidden. In contrast to conventional speakers, an in-wall speaker offers many benefits such as cost effectiveness, compatibility, easy installation, and flexibility. Further, it does not occupy any floor space and can be placed across any flat surface including ceilings. It is most suitable in multi-room settings. Other names for in-wall speakers are in-ceiling speaker and recessed ceiling speakers.
A recent addition in the field of in-wall speakers, in-wall surround sound speaker systems form a perfect match for your home décor. The primary purpose of an in-wall surround sound speaker is to enhance home theater audio system, thereby providing non-intrusive enjoyment by keeping the speakers invisible. Its advantages, among many others, are high quality, outstanding performance, perfect sound, space saving, easy placement, sleek design, and versatility. In-wall surround sound speakers are most ideal in a home theater environment.
In-wall speakers with surround speaker system can be referred to as an audio system that involve the application of subwoofers, volume controls, cables, and two or more speakers including a rear speaker. Generally, surround sound speaker systems are available in two designs: monopole and bipole. Matrix sound and discrete sound are among the prime technologies employed for the performance of surround speaker system.
In-wall surround sound speaker system also has some disadvantages. Since it has static position, in-wall surround sound speaker systems sometimes lead to poor accuracy. Further, its installation cost is high. Another factor that affects the proper functioning of in-wall surround sound speakers is diffraction loss.
At present, a range of in-wall surround speakers coupled with advanced technologies are available according to the budget, need, and style of the customers.